17 Nov 2026

From First Call to Running Line: What Happens on a Machine Vision Project

From First Call to Running Line: What Happens on a Machine Vision Project

If you've never bought a vision system before, it's hard to know what you're signing up for. How long does it take? What do we need from you? When do you actually see it working?

Every project is different, but most of ours follow the same broad stages. Here's what to expect.

1. The first conversation

It starts with a call with one of our engineers, not a salesperson. We want to know what you're making, what you need to catch or measure, how fast the line runs, and what happens to a part when it fails.

We'll also ask what's going wrong now. Are faults getting through to customers? Is manual inspection slowing the line down? Is it a traceability requirement? The answer shapes everything that follows.

2. Testing your parts

Before we recommend anything, we want to see your parts. Ideally that means a mix of good ones and examples of each fault you need to catch, including the borderline ones that people argue about on the shop floor.

We test them in our lab with different cameras, lenses and lighting until we know what will show the faults clearly and reliably. This is where most of the important decisions get made, and it's far cheaper to get them right here than on your line.

3. Proof of concept

For more demanding jobs, we'll often build a proof of concept before you commit to a full system. It shows the inspection working on your actual parts, so you can see the results for yourself rather than taking our word for it.

It also flushes out any surprises early, such as a fault that's harder to see than expected, or a part that doesn't sit the same way twice.

4. Design and proposal

Once we know what works, we put together a proposal covering the hardware, the software, how the system connects to your line and what it will cost. Because we're independent of any single manufacturer, the recommendation is based on what suits your application rather than on what we happen to stock.

We'll also be clear about what the system will and won't do. A good proposal sets realistic expectations from day one.

5. Build and testing

We build and program the system, then test it against your parts before it goes anywhere near your factory. This is the point to check it catches what it should, passes what it should, and keeps up with your line speed.

6. Installation and commissioning

Next, we install the system on your line and commission it. That means fitting the cameras and lighting, connecting to your PLC or line controls, calibrating, and fine-tuning the inspection with real production running through it.

Parts on a running line never behave quite like parts on a bench, so this stage always involves some adjustment. It's normal, and it's why our engineers are there in person.

7. Training and handover

We train the people who'll use the system day to day, the people who'll maintain it, and the key staff who'll set up new products or adjust inspections. Training is hands-on and kept to small groups, so everyone gets time on the system itself.

8. Support afterwards

A vision system has to keep working on a line that changes over time: new products, new materials, new suppliers. We offer warranty support, troubleshooting and ongoing maintenance contracts, and because our engineers built the system, they know it inside out when you call.

How long does it take?

That depends on the job. A single smart camera checking one feature can be running in a matter of weeks. A multi-camera system with deep learning, integrated into a larger automated line, can take many months. We'll give you a realistic timeline after testing your parts, rather than a guess at the first call.

Ready to talk about your application?

The easiest first step is to send us some samples. Our engineers will test them and tell you honestly whether vision is the right answer, and what it would take.

Call us on +44 (0) 1933 62 51 62, email info@fishersmith.co.uk, or book a call with an engineer at www.fishersmith.co.uk.

Interested in working together, discussing your application, or simply learning more?